| ब्रांड नाम: | Bluwat |
| मॉडल नंबर: | C8015 |
| MOQ: | 1 टन |
| कीमत: | विनिमय योग्य |
| डिलीवरी का समय: | 5-8 कार्य दिवस |
| भुगतान की शर्तें: | एल/सी,डी/ए,डी/पी,टी/टी |
15-20% cationic-charge candidate for dewatering trials
Blufloc C8015 एक धनायनित पॉलीएक्रिलामाइड (CPAM) पॉलीमर फ्लोकुलेंट है जो ऑफ-व्हाइट दानेदार पाउडर के रूप में 89% से अधिक ठोस सामग्री के साथ आपूर्ति किया जाता है। TDS स्पष्टीकरण, कीचड़ गाढ़ा करने और निर्जलीकरण के मूल्यांकन के लिए 15-20% धनायनित चार्ज रेंज सूचीबद्ध करता है। इसे धनायनित पॉलीइलेक्ट्रोलाइट के रूप में भी वर्णित किया गया है, इसे वास्तविक फ़ीड और पृथक्करण कार्य का परीक्षण करके चुना जाता है।
Cationic polyacrylamide sold as Blufloc C8015, with a High molecular-weight classification in the property table.
Cationic charge degree: Medium (15-20%). Compare this specification with the actual application response.
Off-white granular powder, 20-100 mesh, with 89% minimum solid content. Packaging is selected from the options listed for this grade.
| Property | Grade-specific TDS value |
|---|---|
| Product grade | Blufloc C8015 |
| Appearance | Off-White Granular Powder |
| Ionic Charge | Cationic |
| Particle Size | 20-100 Mesh |
| Molecular weight (TDS classification) | High |
| Cationic charge degree | Medium (15-20%) |
| Solid Content | 89% Min. |
| Bulk density (unit not stated in TDS) | About 0.6-0.8 |
| Specific Gravity at 25°C | 1.01-1.1 |
| Recommended Working Concentration | 0.2-0.5% |
| pH (Test concentration not stated) | 4-6 |
| Shelf Life | 2 years |
Molecular weight is given as a TDS classification, without a numerical range. Bulk-density units are not specified in the supplied document. The specific-gravity entry gives 25°C but no sample concentration. The pH test concentration is not stated; confirm it for specification comparisons.
For C8015 sludge trials, compare filtrate quality and the condition of the separated solids under the intended equipment conditions. Paper retention and wet-strengthening duties are also listed, as are thermal-power scrubber water, mining-sludge dewatering and oil-and-gas wastewater treatment. Keep the process location attached to the test result so that a water-clarification observation is not presented as a finished dewatering result.
Listed duties include raw-water flocculation and clarification, industrial primary clarification, secondary or tertiary treatment, industrial-sludge thickening and dewatering, primary sewage treatment and sewage-sludge dewatering.
The TDS lists paper retention and wet-strengthening applications and thermal-power scrubber-water clarification. Define the paper-process location or water-treatment stage before comparing grade response.
Mining and metallurgy sludge dewatering and petroleum or gas-field wastewater clarification and sludge dewatering are included. These application listings do not establish a drilling-fluid or enhanced-oil-recovery formulation.
C8015 at 15-20% charge overlaps the 15-25% range of C8020. Both have a High molecular-weight classification. The overlap means the code and percentage alone cannot establish interchangeability; evaluate the actual feed and full specification.
| Grade | Molecular-weight class | TDS charge entry | Working concentration |
|---|---|---|---|
| C8015 | High | Medium (15-20%) | 0.2-0.5% |
| C8020 | High | Medium (15-25%) | 0.2-0.5% |
| C8010 | High | Low (10-15%) | 0.2-0.5% |
This comparison describes TDS specification differences. Select grade and dose using the actual feed and equipment results.
The TDS recommends a 0.2-0.5% solution before use. This is the prepared polymer-solution concentration, not a fixed dose in the treatment stream.
The supplied instructions specify plastic, enamel or fiberglass containers for solution storage and advise against metal containers. Request the appropriate dissolution and mixing procedure for the actual water and equipment; no fixed mixing speed or dissolution time is provided.
Compare doses on the actual water, sludge, slurry or formulation. Record the product grade, solution concentration, dose basis, feed condition and separation observations. The TDS requires dose selection from laboratory results.
Include the existing coagulant or process-aid program in the evaluation. Confirm liquid quality and solids handling under equipment conditions before routine dosing; the TDS does not define one chemical-addition sequence for every application.
Packaging listed for Blufloc C8015: 25 kg net polybags or 25 kg net Kraft paper bags. Confirm the selected pack, required quantity and destination with the quotation.
Store in the original packaging in a cool, dry place away from heat, flame and direct sunlight. The TDS states a two-year shelf life. Follow the current product label and SDS for handling instructions.
Yixing Bluwat Chemicals Co., Ltd. is a manufacturer and exporter of water treatment chemicals based in Yixing, Jiangsu, China. Our business began in 2000, the company was formally established in 2002, and our Yixing plant began production in 2004.
Bluwat operates three production bases and supplies customers in around 100 countries and regions. Our portfolio includes Blufloc polyacrylamide powders and emulsions, Water Decoloring Agent, PolyDADMAC, Polyamine, PAC, ACH, ferric sulphate and specialty treatment chemicals.
Our team supports product selection around the actual water, sludge or process stream. For a purchasing review, request the current grade-specific TDS, SDS and batch quality documents, and discuss sample evaluation, packaging and export requirements with Bluwat.
Share your treatment objective, feed information and existing chemical program so that the discussion addresses the intended use of C8015. Manufacturing supply, grade documentation and application evaluation should be reviewed together when preparing the order.
C8015 lists 15-20% charge, while C8020 lists 15-25%. Both are classified High in molecular weight, so a representative trial is needed to distinguish their suitability.
No. The sheet lists pH 4-6 without a solution concentration. Confirm the test basis before using it in a purchasing comparison or interpreting it as a process condition.
Related product names include Cationic Polyacrylamide, Cationic PAM, CPAM, Cationic Polyelectrolyte and Polymer Flocculant. Keep C8015 with the name when enquiring, because a general PAM name does not identify a specific grade.
Establish the dose by laboratory trials and confirmation in the intended equipment. The working-concentration entry 0.2-0.5% describes the prepared solution; it is not a treatment dose in mg/L.
Compare it with the existing product on the same feed and dose basis. The TDS does not establish automatic equivalence to another grade or unconditional replacement of a coagulant program.
Contact Bluwat with the full grade code, application, feed information, required quantity, packaging and destination. Request current grade-specific technical and quality documents and discuss sample evaluation for the intended duty.
Tell Bluwat the grade, application, required quantity and packaging. Discuss representative sample testing and request the current product specification before final selection.