|
| ब्रांड नाम: | BLUWAT |
| मॉडल नंबर: | ब्लूफ्लोक |
| MOQ: | 1000KGS |
| कीमत: | विनिमय योग्य |
| डिलीवरी का समय: | 7-10 कार्यदिवस के भीतर |
| भुगतान की शर्तें: | जटिल प्लास्टिक कार्यालय उपकरण पार्ट्स इंजेक्शन मोल्डिंग असेंबली |
BLUFLOC Anionic Polyacrylamide is a high molecular weight PAM powder designed for water based oilfield drilling mud systems. With a molecular weight range from 5 to 25 million, it helps improve drilling fluid viscosity, rheological performance, cuttings suspension and lubrication during drilling circulation.
BLUFLOC Anionic Polyacrylamide is a high molecular weight PAM powder designed for water based oilfield drilling mud systems. With a molecular weight range from 5 to 25 million, it can help increase drilling fluid viscosity, improve rheological performance, support cuttings suspension and enhance lubrication during drilling circulation.
In oil drilling operation, drilling mud must maintain proper viscosity and lubrication to carry cuttings, reduce friction, cool drilling tools and protect the borehole wall. When the mud viscosity is too low, cuttings may settle and drilling efficiency may decline. When lubrication is not sufficient, friction between the drill string, mud and formation may increase.
BLUFLOC Anionic PAM helps improve the drilling fluid system by forming a high viscosity polymer solution after proper dissolution.
This product is suitable for oilfield drilling mud viscosifier, water based drilling fluid additive, lubrication support, shale stabilization, borehole stability, fluid loss control support and selected oilfield wastewater treatment applications.
High molecular weight range from 5 to 25 million supports different viscosity and mud performance requirements.
Designed as an anionic polyacrylamide powder for water based oilfield drilling mud systems.
Works as a drilling mud viscosifier and rheology modifier to improve mud circulation stability.
Helps improve lubrication in water based drilling fluids and supports smoother drilling circulation.
Supports cuttings suspension and carrying capacity during drilling fluid circulation.
Helps improve borehole stability and supports shale stabilization in sensitive formations.
Can support fluid loss control by improving drilling mud structure and filtration behavior.
Minimum 89 percent solid content and controlled particle size support stable field use.
20 to 100 mesh granular powder is suitable for industrial handling, storage and solution preparation.
Low dosage requirement helps reduce total chemical consumption in oilfield drilling applications.
| Item | Specification |
|---|---|
| Product Name | Anionic Polyacrylamide |
| Brand | BLUFLOC |
| Recommended Grade | HA7525 or Customized Anionic PAM |
| Product Type | High Molecular Weight Water Soluble Polymer |
| Ionic Type | Anionic |
| Appearance | Off White Granular Powder |
| Particle Size | 20 to 100 Mesh |
| Molecular Weight Range | 5 to 25 Million |
| Anionic Degree | 5 to 100 Percent Range |
| Solid Content | Minimum 89 Percent |
| Bulk Density | About 0.8 |
| Residual Monomer | Max 0.05 Percent |
| Recommended Working Concentration | 0.1 to 0.5 Percent |
| pH of 1 Percent Solution | Around 6 to 8 for Anionic Type |
| Storage Temperature | 0 to 35 Degree C |
| Shelf Life | 2 Years |
| Package | 25 kg Bag or 750 kg Big Bag |
BLUFLOC Anionic Polyacrylamide is used to increase the viscosity of water based drilling mud. Proper viscosity helps improve mud carrying capacity, cuttings suspension and drilling fluid circulation stability.
A properly dissolved PAM solution can help improve the lubricating property of drilling mud. Better lubrication supports smoother drilling operation and helps reduce friction in the drilling process.
This product is suitable for water based drilling mud systems where high molecular weight anionic polymer is required to improve mud rheology, viscosity and overall fluid stability.
During drilling, cuttings must be transported from the bottom of the well to the surface. Anionic PAM helps improve suspension performance and supports the carrying capacity of drilling fluid.
Stable drilling mud is important for borehole wall protection. BLUFLOC Anionic PAM helps improve the mud structure and supports borehole stability in drilling operations.
In shale or clay rich formations, water invasion can cause swelling and dispersion. Anionic PAM can support shale stabilization by improving the performance of water based drilling mud.
Although this product focuses on viscosifying and lubrication, high molecular weight anionic PAM can also support fluid loss control by improving drilling mud structure and filtration behavior.
Anionic PAM can also be used in selected oilfield wastewater clarification, mud water separation and suspended solids settling applications where solid liquid separation is required.
Bluwat can recommend suitable anionic PAM grades according to drilling mud formulation, target viscosity, salinity and field operating conditions.
The molecular weight of polyacrylamide strongly affects viscosity building performance. A higher molecular weight PAM can form a stronger polymer chain network in water, helping improve drilling mud viscosity and suspension performance at low dosage levels.
For oilfield drilling mud, the 5 to 25 million molecular weight range allows customers to select different viscosity levels according to drilling conditions, mud formulation, water quality, salinity and target performance.
Bluwat can recommend suitable anionic PAM grades according to customer requirements, including HA7525 and other high molecular weight grades.
After proper dissolution, BLUFLOC Anionic PAM forms a viscous polymer solution. When added into the drilling mud system, it helps improve viscosity, rheology, lubrication and suspension capacity.
This supports better drilling fluid circulation, helps carry cuttings more efficiently and improves the stability of the water based mud system. It can also work together with other drilling fluid additives depending on the formulation design.
The actual dosage depends on drilling mud formulation, water salinity, temperature, mud density, shale activity, target viscosity and lubrication requirement.
Laboratory testing or pilot testing is recommended before field application. For drilling mud viscosifier and lubrication support, the product should be selected according to required viscosity, mud compatibility and field operating conditions.
Bluwat can provide product selection support and dosing recommendations based on customer drilling fluid requirements.
5 to 25 million molecular weight range supports different drilling mud viscosity requirements.
Suitable for drilling mud viscosifier and lubrication support in water based drilling systems.
High molecular weight anionic PAM option is available for stronger viscosity performance.
Supports stable quality, consistent dosing and reliable field application.
20 to 100 mesh powder supports practical handling and stable solution preparation.
Effective at low dosage levels and suitable for cost controlled oilfield operations.
Suitable for water based drilling mud systems requiring viscosity improvement and rheology control.
Direct supply from China with technical documents, sample support and customized grade options.
Bluwat Chemicals is a professional manufacturer and exporter of polyacrylamide and water treatment chemicals with more than 25 years of manufacturing experience.
Bluwat supplies anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide for oilfield drilling, EOR, wastewater treatment, mining, papermaking, sludge dewatering and other industrial applications.
For oilfield customers, Bluwat can provide technical support, product selection suggestions, sample support and customized PAM grades according to different drilling mud systems.
Anionic Polyacrylamide is used as a drilling mud viscosifier, lubrication support additive, shale stabilization aid, cuttings suspension improver and drilling fluid performance modifier.
The molecular weight range of BLUFLOC anionic polyacrylamide is 5 to 25 million.
Yes. After proper dissolution, the polymer solution can help improve lubrication in water based drilling mud and support smoother drilling circulation.
Yes. It is suitable for water based drilling mud systems that require viscosity improvement, lubrication support and rheology control.
Yes. High molecular weight anionic PAM helps improve drilling mud viscosity and carrying capacity, which supports better cuttings suspension.
The recommended dissolving concentration is 0.1 to 0.5 percent.
Normally it takes about 1 hour under proper agitation conditions.
Yes. Bluwat can recommend HA7525 or other anionic PAM grades according to drilling mud formulation, target viscosity and field conditions.
BLUFLOC Anionic Polyacrylamide supports water based drilling mud viscosity improvement, lubrication support, cuttings suspension, borehole stability and shale stabilization. Bluwat can provide factory direct supply, technical documents, sample support and customized PAM grade selection for oilfield customers.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski